Floor Products Manufacturer

Wally exterior wall paint

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on skype
Share on email

Additional information

Description

Main feature
Water-based environmentally friendly exterior wall finishing paint, excellent cost performance.

Large painting area, dense coating film and beautiful appearance

Excellent adhesion, long-lasting wall protection, anti-powdering

Good stain resistance and easy to clean.

Scope of application
Widely used in decoration and protection of general building exterior walls

Technical Parameters

Implementation standard: GB/T9755-2014

Theoretical paint consumption:3-4㎡/kg/two coats (calculated based on dry film thickness of 30 microns)

Drying time:1hour to surface dry (at ambient temperature of 23°C and relative humidity of 50%)

Hard work for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Contrast ratio:0.92

Scrub resistance:5000times

Aging resistance:250hours

Shelf life:12months from the date of production (unopened)

Use reference
Substrate: It should be solid, clean, dry (moisture content ≤ 10%), PH ≤ 10; powdered substrates should be removed with a spatula or wire brush to remove the powdered layer and completely remove mildew.

Old paint film: check the aging of the old paint film, and the loose parts should be completely removed.

Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration is generally not more than 5%), then rinse with clean high-pressure water and dry in the air

Construction method: either roller coating or spraying

Dilution: no need to add water

Cleaning of utensils: wash them with clean water in time after construction.

Safety, labor protection: safety measures should be taken during construction, and labor protection clothing should be worn.

Environmental requirements

Stored in a dry and ventilated warehouse at 5~35℃

Construction environment: temperature ≥ 5°C (substrate temperature ≥ 10°C), humidity ≤ 85%, no rain, snow, fog, wind force ≤ 4

Transportation: Handle as non-dangerous goods, prevent long-term freezing and exposure

Reviews

There are no reviews yet.

Be the first to review “Wally exterior wall paint”

Your email address will not be published. Required fields are marked *

Request a Quote Form